球头铣刀铣削球面的表面形貌建模与仿真研究

基于齐次坐标矩阵变换原理和矢量运算法则，建立了工件坐标系下球头铣刀扫掠面的数学模型，基于Z-MAP法设计了球形表面形貌的生成算法，利用该算法对球头铣刀分别采用3D环绕法和放射加工法这两种典型走刀路线加工凸球面，并对加工后的表面形貌进行了仿真，通过分析对比仿真结果，发现3D环绕法更有利于减小表面粗糙度。同时，仿真结果和试验结果具有较高的吻合度，表明该仿真方法是可靠的，可以用于实际生产中球头铣刀铣削球面表面形貌的预测。     

基于射流冲击作用的舰机适配性数值分析与优化

准确分析和控制射流冲击对航母甲板环境的影响是新型喷气偏流板设计和布局的关键所在。为了确定射流冲击影响最小的偏流板布局，运用有限体积法，采用分区混合网格方案，结合雷诺时均纳维斯托克斯（RANS）方程和SST k-ω湍流模型对喷气偏流板在不同布局下的射流冲击效应进行三维数值模拟。选取舰载机双发动机全加力状态时喷气偏流板与发动机距离不同、喷气偏流板倾角不同共12种布局组合进行射流冲击效应的对比计算,计算结果显示了喷气偏流板各布局下的流场参数、传热特性、尾喷口温升、冲击力和力矩等分布规律。定性和定量分析了燃气射流冲击下温度场和速度场的危险区域，结果表明，偏流板与发动机距离5 m、偏流板倾角45°时的布局更有利于将燃气射流向上引导。在此基础上，基于倾角最小化原则及二次导流原理优化设计了一种导流隔热性能好、工作稳定性高的被动隔热式喷气偏流板装置。     

基于深度学习的传感器优化布置方法

针对传感器优化布置(optimal sensor placement,简称OSP)问题,提出了一种新的使用深度神经网络的解决方案,并以简化的桥梁形状的桁架结构中的振动测试传感器优化为例进行了验证。首先,选择一种传统的传感器优化布置方法,对自动化生成的大量不同的桁架结构分别进行传感器优化布置计算,将所得优化布置结果在进行数据预处理后构建出深度学习方法所需要的训练集与验证集;其次,使用Python语言和深度学习框架TensorFlow设计实现与本研究问题适配的深度神经网络模型并训练;然后,随机生成了新的桁架结构参数;最后,将深度神经网络输出的传感器布置结果和传统方法的计算结果进行了比较,验证了本研究方法的有效性以及在速度上、可移植性与可扩展性方面的性能优势。     

用于机床减振的磁流变阻尼器优化设计

以三平动冗余驱动并联机床为研究对象,设计了一种具有位移放大功能的磁流变阻尼器,通过Ansys workbench有限元分析软件,对阻尼器的磁路饱和情况进行模拟仿真和分析,使阻尼器的阻尼出力达到最优。研究结果表明,通过优化使磁场分布更加合理,提高了阻尼器的力学性能,优化方法是可行有效的。     

Graph-based video fingerprinting using double optimal projection

A double optimal projection method that involves projections for intra-cluster and inter-cluster dimensionality reduction are proposed for video fingerprinting. The video is initially set as a graph with frames as its vertices in a high-dimensional space. A similarity measure that can compute the weights of the edges is then proposed. Subsequently, the video frames are partitioned into different clusters based on the graph model. Double optimal projection is used to explore the optimal mapping points in a low-dimensional space to reduce the video dimensions. The statistics and geometrical fingerprints are generated to determine whether a query video is copied from one of the videos in the database. During matching, the video can be roughly matched by utilizing the statistics fingerprint. Further matching is thereafter performed in the corresponding group using geometrical fingerprints. Experimental results show the good performance of the proposed video fingerprinting method in robustness and discrimination.     

Cost-based holistic twig joins

An evaluation of XML queries such as XQuery or XPath expressions represents a challenging task due to its complexity. Many algorithms have been introduced to cope with this problem. Some of them, called binary joins, evaluate separated parts of a query and subsequently merge intermediate results, while the others, called holistic twig joins, evaluate a query as a whole. Moreover, these algorithms also differ in what index data structure they use to handle XML data. There exist cost-based approaches utilizing binary joins and various index data structures; however, they share a limitation. The limitation is that they cannot perform a join between query nodes not having a direct XPath relationship. Such a join can be advantageous especially if their joint selectivity is high. Since holistic joins work with all query nodes they overcome this limitation. In this article, we introduce such a holistic twig join called CostTwigJoin. To the best of our knowledge, CostTwigJoin is the first holistic join capable of combining various index data structures during an evaluation of an XML query. Usage of the holistic join has yet another advantage for cost-based approaches: an optimizer does not have to resolve the order of binary joins; therefore, the search space is reduced. In this article, we perform thorough experiments on hundreds of queries to evaluate our approach and demonstrate its advantages.     

Low‐order optimal regulation of parabolic PDEs with time‐dependent domain

Observer and optimal boundary control design for the objective of output tracking of a linear distributed parameter system given by a two‐dimensional (2‐D) parabolic partial differential equation with time‐varying domain is realized in this work. The transformation of boundary actuation to distributed control setting allows to represent the system's model in a standard evolutionary form. By exploring dynamical model evolution and generating data, a set of time‐varying empirical eigenfunctions that capture the dominant dynamics of the distributed system is found. This basis is used in Galerkin's method to accurately represent the distributed system as a finite‐dimensional plant in terms of a linear time‐varying system. This reduced‐order model enables synthesis of a linear optimal output tracking controller, as well as design of a state observer. Finally, numerical results are prepared for the optimal output tracking of a 2‐D model of the temperature distribution in Czochralski crystal growth process which has nontrivial geometry. © 2014 American Institute of Chemical Engineers AIChE J, 61: 494–502, 2015     

Electromagnetism-like algorithms for optimized tool path planning in 5-axis flank machining

Optimization of tool path planning using metaheuristic algorithms such as ant colony systems (ACS) and particle swarm optimization (PSO) provides a feasible approach to reduce geometrical machining errors in 5-axis flank machining of ruled surfaces. The optimal solutions of these algorithms exhibit an unsatisfactory quality in a high-dimensional search space. In this study, various algorithms derived from the electromagnetism-like mechanism (EM) were applied. The test results of representative surfaces showed that all EM-based methods yield more effective optimal solutions than does PSO, despite a longer search time. A new EM-MSS (electromagnetism-like mechanism with move solution screening) algorithm produces the most favorable results by ensuring the continuous improvement of new searches. Incorporating an SPSA (simultaneous perturbation stochastic approximation) technique further improves the search results with effective initial solutions. This work enhances the practical values of tool path planning by providing a satisfactory machining quality.     

Study on life and path of fatigue cracks in multiple site damage plates

This paper presents experimental and numerical study of the fatigue crack growth of hollowed pre-notched plates with multiple site damages (MSD). The numerical analyses were performed using finite element method. Experiments were carried out to validate the numerical results. Fatigue tests of aluminum sheets with MSD cracks were conducted to evaluate the effects of some parameters such as the thickness, hole diameter and central distance of the holes. The results show that the distance of the holes has greatest and size of the hole has little effects on the fatigue lives. Nucleation of cracks strongly depends on the thickness, distance and hole size.